ERMCO COMPONENTS INC

Slide
Circuit Breakers

Transformers Components internal oil-immersed secondary circuit breakers are designed for use as part of a protection package for either single or three phase distribution transformers. The circuit breaker permits operation of the transformer at loads exceeding its continuous self-cooled rating during short time peaks.

The circuit breaker trips due to heat from the combination of transformer current and the temperature of the transformer oil. Optional magnet trip circuit breakers follow the same interrupting characteristics as the normal breaker except the breaker will immediately trip when the current exceeds 10-15 times rated transformer load current.

5-50 kVA Circuit Breakers

75-167 kVA Circuit Breakers

Three Phase Circuit Breakers

5-50 kVA Circuit Breakers

ERMCO manufactures a complete product range of small kVA single phase circuit breakers for use in oil filled distribution transformers. Products include the thermal trip and magnetic trip breakers. Breakers may be ordered separately or as a breaker on a bracket.

 

The circuit breaker is typically mounted inside the transformer directly above the core/coil assembly. Operating linkage for the breaker is brought out through the tank above the oil level to an external operating handle.

 

The breaker on bracket is a completely factory assembled kit designed to provide the transformer manufacturer a simpler design for assembly and to eliminate linkage adjustments. The leading cause of inoperable circuit breakers – linkage problems – can be eliminated by specifying breaker on bracket.

75-167 kVA Circuit Breakers

ECI manufactures a complete product range of large kVA single phase circuit breakers for use in oil filled distribution transformers. These breakers come with the signal light and emergency overload features. Breakers may be ordered separately or as a breaker on a bracket.

 

The circuit breaker is typically mounted inside the transformer directly above the core/coil assembly. Operating linkage for the breaker is brought out through the tank above the oil level to an external operating handle.

 

The breaker on bracket is a completely factory assembled kit designed to provide the transformer manufacturer a simpler design for assembly and to eliminate linkage adjustments. The leading cause of inoperable circuit breakers – linkage problems – can be eliminated by specifying breaker on bracket.

Three Phase Circuit Breakers

ECI manufactures a complete product range of three phase circuit breakers for use in oil filled distribution transformers. These breakers come with the signal light and emergency overload features. Breakers may be ordered separately or as a breaker on a bracket.

 

The circuit breaker is typically mounted inside the transformer directly above the core/coil assembly. Operating linkage for the breaker is brought out through the tank above the oil level to an external operating handle.

 

The breaker on bracket is a completely factory assembled kit designed to provide the transformer manufacturer a simpler design for assembly and to eliminate linkage adjustments. The leading cause of inoperable circuit breakers – linkage problems – can be eliminated by specifying breaker on bracket.

Explore our full suite of products

Browse our complete selection of single-phase padmount, single-phase polemount, three-phase padmount, and three-phase polemount transformers today.

Check Product Availability

See if a product is currently in stock.

Get Started with ERMCO Distribution Transformers and ERMCO Components

Our dedicated team selflessly serves the community, especially in times of natural disasters — because we know the impact we make on peoples’ lives.

Accessibility Toolbar