SINGLE PHASE

Slide
PADMOUNT TRANSFORMERS

Type 1 and Type 2: These represent ERMCO's full-size product line and the most variety in options. They are rated from 10 to 250 kVA and comply with IEEE Standard C57.12.38.

TrimLine: ERMCO's mid-size product line is ideal for customers seeking lower cost and the perfect blend of smaller size without sacrificing operating room. The TrimLine follows the minimum dimensions in the IEEE Type 2 figure except the distance between the HV bushings is 9 inches (IEEE dimension is 10 inches at 8.3 kV).

MicroTrim: The most compact single phase padmount in the ERMCO line and offering the lowest cost. MicroTrims come in loop or radial feed and are equipped with a hinged hood and removable sill.

Pad Brochure

Provides kVA and standard voltage offerings and available accessories.

Instruction Manual

Provides instructions for transformer installation and operation.

Product Options

Provides transformer product range and equipment options.

Disassembly Video

Provides instruction installing and uninstalling stack brackets.

Type 1 & 2

ERMCO’s full-size product line has a wide variety in options and ratings. These comply with IEEE Standard C57.12.38.

  • Types 1 & 2
  • kVA Ratings: 5-250
  • High Voltage: 2.4 – 19.9 kV
  • Bil: 150kV (max)
  • Low Voltage: 600V (max)
kVA and Standard Voltage Offerings
  • All standard tap configurations available.
  • Dual voltage available in most combinations.
  • Dual voltage with taps in higher voltage position only.
  • Dual voltage: Highest BIL applies to both voltages.
  • Additional voltages may be available, consult with factory.
  • Impedance and loss options available in most designs.

kVA & Standard Voltage Table
Tanks:
  • Lifting provisions are stainless steel pads recessed into the tank side.
  • Hood is attached with stainless steel hinges and requires no special tools for removal.
  • Recessed locking provision has a handy grip for opening the hood.
  • Locking nut and backing plate are 300 grade stainless steel for long service life.
Bushings:
  • Externally clamped with stainless steel studs and plated hardware.
  • Internal leads are sized for bushing extraction in times of maintenance or repair.
Corrosion Protection:
  • 100% of the padmount receives a paint finish that exceeds all IEEE requirements including 160 in-lb. impact, 2000-hour salt spray, 1000 hours QUV and 20 cycle SCAB.
  • ERMCO developed a method to cure powder paint on the padmount tank cover without damaging the transformer internals giving ERMCO the only true 100% powder paint coverage.

Optional Equipment Table
Accessories Table

Quality

  • All electrical testing is per IEEE standards.
  • Many other tests are made for control purposes such as, core loop loss and exciting current, coil ratio and polarity, oil properties, and multiple oil leak checks.

 

Warranty

  • All ERMCO padmounts carry a full 2-year warranty.
  • Coverage includes round trip transportation between the purchaser’s shipping dock and the repair facility.

Trimline & Microtrim

Trimline

ERMCO’s mid-size product line is ideal for customers seeking lower cost and smaller size without sacrificing operating room. The TrimLine follows the Type 2 design except the distance between HV bushings is 9 inches (IEEE is 12 inches at 15.5 kV).

 

Micro-Trim

ERMCO’s most compact product line offers the lowest cost. MicroTrims come in loop or radial feed and are equipped with hinged hoods and removable sills.

kVA and Standard Voltage Offerings
  • All standard tap configurations available.
  • Dual voltage available in most combinations.
  • Dual voltage with taps in higher voltage position only.
  • Dual voltage: Highest BIL applies to both voltages.
  • Additional voltages may be available, consult with factory.
  • Impedance and loss options available in most designs.

kVA & Standard Voltage Table
Tanks:
  • Lifting provisions are stainless steel pads recessed into the tank side.
  • Hood is attached with stainless steel hinges and requires no special tools for removal.
  • Recessed locking provision has a handy grip for opening the hood.
  • Locking nut and backing plate are 300 grade stainless steel for long service life.
Bushings:
  • Externally clamped with stainless steel studs and plated hardware.
  • Internal leads are sized for bushing extraction in times of maintenance or repair.
Corrosion Protection:
  • 100% of the padmount receives a paint finish that exceeds all IEEE requirements including 160 in-lb. impact, 2000-hour salt spray, 1000 hours QUV and 20 cycle SCAB.
  • ERMCO developed a method to cure powder paint on the padmount tank cover without damaging the transformer internals giving ERMCO the only true 100% powder paint coverage.

Optional Equipment Table
Accessories Table

Quality

  • All electrical testing is per IEEE standards.
  • Many other tests are made for control purposes such as, core loop loss and exciting current, coil ratio and polarity, oil properties, and multiple oil leak checks.

 

Warranty

  • All ERMCO padmounts carry a full 2-year warranty.
  • Coverage includes round trip transportation between the purchaser’s shipping dock and the repair facility.

Explore our full suite of products

Explore our full selection of components including expulsion fuses, arrester disconnect switches, bushings, product accessories, and circuit breakers today.

Check Product Availability

See if a product is currently in stock.

Get Started with ERMCO Distribution Transformers and ERMCO Components

Our dedicated team selflessly serves the community, especially in times of natural disasters — because we know the impact we make on peoples’ lives.

Accessibility Toolbar