PRODUCT ACCESSORIES

Transformer Components offers component accessories for use on distriubtion transformers to enhance performance and reliability. 

Dripshield

Anti-Tracking Kit

Single Pole Terminal Board

Double Pole Terminal Board

Current Limiting Fuse Block

Dripshield for Padmount Transformers

ECI offers a high strength nonmetallic drip cup for use with bayonet fused transformers. The drip shield has a unique positive latching system that clips on the outside of the bayonet assembly and locks in place, so a lineman’s hot stick won’t dislodge the cup.

 

  • Can be specified for the OEM to install at the transformer factory.
  • Can be added onto transformers as a field retrofit.
  • Prevents accidental oil spillage in the event of being hit with a hot stick.

 

Catalog #: 7580ZB2199

Anti-Tracking Kit

ECI offers the bushing Anti-Tracking Kit for use on Distribution Transformer high voltage bushings in contaminated areas.

 

Installation of the Anti-Tracking Kit is performed by placing the small spring around the bushing top casting between the casting and the porcelain making sure it touches both. The larger spring is then placed around the lower porcelain touching both the porcelain and the tank cover. The grommet on the loose end attached to the bottom spring should be tightly attached to the tank ground nut.

 

The springs used in the Anti-Tracking Kit are 302 stainless with a nickel plated brass grommet.

 

Catalog #: 7590ZA0199

Single Pole Terminal Board

Single Pole high voltage terminal boards are available for single phase distribution transformers in one bushing. These terminal boards provide a standardized common connection point insulating and securing the coil lead and high voltage bushing lead connections from ground points which may cause an arc within the tank of the distribution transformer.

  • 7285ZA2299       5/16”-18 x 1-1/4”
  • 7285ZA2399        5/16”-18 x 1”
  • 7285ZA2599        3/8”-16 x 1-1/4”

Double Pole Terminal Board

Double Pole high voltage terminal boards are available for double phase distribution transformers in two bushing. These terminal boards provide a standardized common connection point insulating and securing the coil lead and high voltage bushing lead connections from ground points which may cause an arc within the tank of the distribution transformer.

  • 7285ZA2499      (2) 5/16”-18 x 1″

Current Limiting Fuse Block

Barre d’outils d’accessibilité